..Inside is finished with a rich charcoal trunk lining... with lots of cargo space.....Outside finished with our primer grey gelcoat... ready to shoot .... Composite Glass Tough ... 100% made in U.S.A. by Sumax. Fit all year Softail models except Deuce. Bags come complete with all required stainless steel powder coated high gloss black brackets. Brackets attach at 2 stock locations on the fender rails and one point behind the rear passenger pegs. Bags have 1/4 turn Dzus fasters for quick and easy removal.. Stock Turn Signals located on fender or rails must be relocated for bag clearance. Deluxe models need not to relocate. Wide seats may hinder opening of lid. Measurement from mounting Hole on Fender rail to Bottom of support Bar: 13.5". If your exhausts are at the axle or below, you should have clearance. Double check 13.5" Measurement. If your bike is lowered where the rear axle/nut is above the bracket, axle/nut may contact & dammage your bag.

Your stock fender must be cut behind the fender rails to allow for the Overlay to line up with your bags or use our #8759 Sub Fender
Bagger Fenders Fill The GAP
Mounting Bracket #8761

Call us at 800-654-5546 with any questions. We are always glad to help or email us your questions

Here is the #8757 on the Sub Fender #8759
Back to Sumax Home Page
Popular Front Bagger Fenders

Loboy Sweeper Front Fender:#8654 6.5" Width Wide Glide $186.45

Click to Order

Hugger Front Fender #8716 6.5" Width Wide Glide $163.85
Click to Order

#8716 Hugger Front Fender
#8654 Loboy Sweeper
Create your own Softail Bagger!
With no shock mount recess you have lots of room for cargo.
Softail Sub Fender #8759 for 1996+ Softails with 150 series tires. $72.32 Click Here to Order

Bag Mounting Brackets for all year Softails
These brackets will allow you to run any Harley (1993+) hard or soft bags. Our Sumax Powdercoated USA Stainless steel brackets attach to 2 stock holes on your fender rails and behind your rear passenger peg. Receptacles are similar to stock accepting 1/4 turn dzus fasteners just like the stock Harley Touring models. Complete kit, nothing else to buy.Measurement from mounting Hole on Fender rail to Bottom of support Bar: 13.5". If your exhausts are at the axle or below, you should have clearance. Double check 13.5" Measurement. You will have to relocate your turn signals on all models except the Deluxe for lid clearance. If your bike is lowered where the rear axle/nut is above the bracket, axle/nut may contact & dammage your bag.
#8761 $299.00 Click Here to Order

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

#8752F Bags shown here with #8757 Lighted Bagger Fender.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Extended Bags on Softails
Since there is no standard height exhaust systems, like Harley Touring bikes, there must be custom modifications to the brackets to ensure the correct desired look and fitment. We will sell you our brackets #8761 in a unpainted finish so you can alter. Click here to go to Extended Bags page for several styles to choose from. Call us to go over details at 800-654-5546
#8756 Plain Softail Fender Overlay.
Fits 1996+ FXST models with 150 series rear tire. Overlay attaches to sub fender at seat tab and under seat. $233.91 Click here to order
#8757FD fender overlay with recessed license plate area. Now you can add your own custom lighting. $257.64 Click here to order
#8757 Softail Fender Overlay. Fits 1996+ FXST models with 150 series tire. Overlay attaches to sub fender at seat tab and under seat. Features RWD installed "plug in" to your rear harness with "Run, Turn & Stop" functions. $525.00
Click here to order.

#8757F fender overlay with 1939 Ford Style LED lighting installed features "Run & Stop" functions ready to "plug in" to your rear harness. Recessed license plate area is also lighted. $500.00 Click here to order.

If you need Dzus Fasteners with Chrome Washers Set of 4 each
#DZUS $12.00 Click Here to Order

All our bags have a rich charcoal trunk lined finished interior.
Our New Bags for 2010 feature better locking and sealing. Bags open from the rear by pushing down on the lock/button. Lids are held into place with the stainless stay. To close lid, just push down on the lid until you hear the lock/button click. Front hinge is stainless steel. Keys are provided with each bag.
Jeff Frask's Deluxe Softail features a set of HD Hard Bags mounted on a set of #8761 Brackets
Stainless Steel Stay holds lid in place.
If your bike is lowered where the rear axle/nut is above the bracket, axle/nut may contact & dammage your bag.
If your bike is lowered where the rear axle/nut is above the bracket, axle/nut may contact & dammage your bag.