Additional Options
 

All Sumax Products & Services are Proudly made in the USA

Watch the Sumax Baggster w/ DVS Video

 

Watch the
Sumax Softail Bagger
w/ DVS Video

 

Watch the Sumax Softail Rubbermount Chopper w/ DVS Video

 

Watch the Sumax Engravers Revenge w/ DVS Video

 

Create your own Dyna Bagger

SUMAX’S extensive range of hard bag options has now expanded with the introduction of bags and associated brackets for use on all H-D Dyna models (except Fat Bob). The brackets are powder coated black by Sumax and feature 1/4-turn quick disconnects with Dzus fasteners like those found on all H-D Touring models. These connectors allow the brackets to be used with either Sumax hard bags or H-D hard or soft bags from ‘93 and Up. Sumax’s own bags are constructed from composite fiberglass, with the outside finished with a gel coat primer ready for paint, and the inside is finished with a charcoal colored trunk liner. The bag’s lids open from back to front with push button lockable latches and all hardware and hinges are stainless steel. Among the options offered are extended and wide versions and pre-installed plug-in LED lighting featuring run,stop and turn functions. ** For Models w/ rear strut mounted turn signals you must relocate turn signals. **

 


(Bags above shown with Optional 1939 Ford LED Lighting)

Dyna Bagger Fenders Now Available!
Please Scroll down for options and pricing.

Pre 2006 Dyna Models:

Part # 8817B
For Pre 2006 Dyna Models, Stock Width Bag complete with all mounting brackets and fasteners. Nothing else to buy, 21"X7"x14.5"

$1099.00 Click Here to Order

Part # 8817
For Pre 2006 Dyna Models
These brackets will allow you to run any Harley (1993&Up) hard bags or soft bags. Brackets are finished in Sumax High Gloss Black powder coat. Our 1 Piece Design makes installation easy, brackets include all mounting hardware and DZUS receptacles which accept 1/4 turn fastners just like the stock Harley Touring models.

$349.00 + Shipping
Click Here to Order

Part # 8817F
For 2006 & 2007 Dyna Models, Stock Width Bag complete with mounting brackets with installed flush mounted 1939 Ford Style LED plug in lighting with "Run, Turn & Stop" functions.

$1499.00 Click Here to Order

Part # 8817RS
For 2006 & 2007 Dyna Models, Stock Width Bag complete with mounting brackets with installed Russ Weirmont surface mount plug in Cat Eye LED lighting featuring "Run, Turn & Stop" functions. (Lighting is a direct plug in on 1997 & Up Models only)

$1499.00 Click Here to Order


2006 & 2007 Dyna Models:

Part # 8814B
For 2006 & 2007 Dyna Models, Stock Width Bag complete with all mounting brackets and fasteners. Nothing else to buy, 21"X7"x14.5"

$1099.00 Click Here to Order

Part # 8814
For 2006 & 2007 Dyna Models
These brackets will allow you to run any Harley (1993&Up) hard bags or soft bags. Brackets are finished in Sumax High Gloss Black powder coat. Our 1 Piece Design makes installation easy, brackets include all mounting hardware and DZUS receptacles which accept 1/4 turn fastners just like the stock Harley Touring models.

$349.00 + Shipping
Click Here to Order

Part # 8814F
For 2006 & 2007 Dyna Models, Stock Width Bag complete with mounting brackets with installed flush mounted 1939 Ford Style LED plug in lighting with "Run, Turn & Stop" functions.

$1499.00 Click Here to Order

Part # 8814RS
For 2006 & 2007 Dyna Models, Stock Width Bag complete with mounting brackets with installed Russ Weirmont surface mount plug in Cat Eye LED lighting featuring "Run, Turn & Stop" functions.

$1499.00 Click Here to Order

 

2008 & Up Dyna Models:

Part # 8815B
For 2008 & Up Dyna Models, Stock Width Bag complete with all mounting brackets and fasteners. Nothing else to buy, 21"X7"x14.5"

$1099.00 Click Here to Order

Part # 8815
For 2008 & Up Dyna Models
These brackets will allow you to run any Harley (1993&Up) hard bags or soft bags. Brackets are finished in Sumax High Gloss Black powder coat. Our 1 Piece Design makes installation easy, brackets include all mounting hardware and DZUS receptacles which accept 1/4 turn fastners just like the stock Harley Touring models.

$349.00 + Shipping
Click Here to Order

Part # 8815F
For 2008 & Up Dyna Models, Stock Width Bag complete with mounting brackets with installed flush mounted 1939 Ford Style LED plug in lighting with "Run, Turn & Stop" functions.

$1499.00 Click Here to Order

Part # 8815RS
For 2008 & Up Dyna Models, Stock Width Bag complete with mounting brackets with installed Russ Weirmont surface mount plug in Cat Eye LED lighting featuring "Run, Turn & Stop" functions.

$1499.00 Click Here to Order

Bagger Fenders for 2002 & Up Dyna's

Part # 8818RWD

Dyna Bagger Style Fender for Stock Length Bags, features a recessed area with installed Russ Weirmont designed LED tail light that features "Run, Turn & Stop" functions. Ready to plug into your rear harness. Fits 2002 & Up Dyna models.

Purchase this fender with a set of Sumax Bags and receive $200 off!!

$639.00 Click Here to Order

Part # 8819RWD

Dyna Bagger Style Fender for Extended Length Bags, features a recessed area with installed Russ Weirmont designed LED tail light that features "Run, Turn & Stop" functions. Ready to plug into your rear harness. Fits 2002 & Up Dyna models.

Purchase this fender with a set of Sumax Bags and receive $200 off!!

$639.00 Click Here to Order

 

Extended Bag options for your Dyna

It is possible to give your Dyna an extreme look with a set of Sumax Extended Saddlebags. Extended bags come in two different configurations listed below.

** Please note that aftermarket exhaust specs and saddle bag fitment may vary. Installaton of Extended Bags on Dyna models is considered a custom application.

 

New
Part # 8805

These extended bags feature left side filled w/ right side cut out for exhaust.
(Bags only, Brackets sold seperatley)

$1015.00 Click Here to Order

New
Part # 8806

These extended bags are closed on both sides. Perfect for running extended bags with radius exhaust systems!
(Bags only, Brackets sold seperatley)

$1040.00 Click Here to Order



Part # 8880
Sumax Saddle Bag Stand

Are you tired of having to find a piece of carpet or a towel to lay your saddle bags down on, hoping the paint does not get scratched? Well look no further! Sumax Saddle Bag Stand is constructed at Sumax with U.S.A. made mild steel, and Powdercoated with our signature Sumax high gloss black finish. Stainless fasteners and rubber bumpers are included. Stand will accept Harley stock and all aftermarket standard and extended length bags.

$89.00 Click Here to Order

 

 

 

 

122 Clear Rd. Oriskany, N.Y. 13424 U.S.A.
Toll Free: 1.800.654.5546 Local: 315.768.1058 Fax: 315.768.1046