|
All Sumax Products & Services are Proudly made in the USA


Watch the Sumax Baggster w/ DVS Video

Watch the
Sumax Softail Bagger
w/ DVS
Video

Watch the Sumax Softail Rubbermount Chopper w/ DVS Video

Watch the Sumax Engravers Revenge w/ DVS Video
|


Create your own Softail Bagger!
 
Interior is finished with a rich charcoal trunk lining with lots of cargo space. Outside is finished with primer grey gelcoat ready to shoot. Bags are composite Glass Tough . 100% made in U.S.A. by Sumax. Fit all year Softail models except Deuce, Rocker and Cross Bones. Bags come complete with stainless steel powder coated high gloss black brackets and all stainless steel mounting hardware. Brackets attach at 2 stock locations on the fender rails and one point behind the rear passenger pegs. Bags have 1/4 turn Dzus fasters for quick and easy removal. Stock Turn Signals located on fender or rails must be relocated for bag clearance. Deluxe models need not to relocate. Wide seats may hinder opening of lid. Measurement from mounting hole on fender rail to bottom of support bar: 13.5". If your exhausts are at the axle or below, you should have clearance. Double check 13.5" Measurement. If your bike is lowered where the rear axle/nut is above the bracket, axle/nut may contact & damage your bag. If you have rear crash bars on your Softail, our brackets will not work.

**Note for Lowered bikes**
If your bike is lowered where the rear axle/nut is above the bracket, axle/nut may contact & damage your bag.
Softail 200mm Bagger Fender
Sumax Now offers our New Softail Bagger fender for Softail Models w/ 200mm rear tire. This is a full replacement fender that features Russ Weirmont Cat Eye LED lighting w/ Run, Turn, and Stop functions. Available in extended and stock length to match our Sumax Bag. This fender is the perfect addition for your bagger project.
|

Part # 8822
Stock Length Softail Bagger fender, features a recessed area with installed Russ Weirmont Designed LED Tail light that features "Run, Turn & Stop" functions. Ready to plug into your rear harness.
Fits Softails w/ 200mm Tire
Purchase this fender w/ a set of Sumax Bags and receive $100 off your order!
$639.00 Click Here to Order
|

Part# 8824
Extended Length Softail Bagger fender, features a recessed area with installed Russ Weirmont Designed LED Tail light that features "Run, Turn & Stop" functions. Ready to plug into your rear harness.
Fits Softails w/ 200mm Tire
Purchase this fender w/ a set of Sumax Bags and receive $100 off your order!
$639.00 Click Here to Order
|
|
Stock Length Bags for Softails

Part # 8752B
Stock Width Bag Complete with all mounting brackets and fasteners. Nothing else to buy, 21"X7"x14.5"
$1099.00 Click Here to Order
|

Part # 8753B
Big Ass Bags are 2.5" wider than stock. Comes complete with all mounting brackets and fasteners. Nothing else to buy. 21"X9.5"X14.5"
$1199.00 Click Here to Order |

Part # 8752RS
Stock Width Bag complete with mounting brackets with installed Russ Weirmont surface mount plug in Cat Eye LED lighting featuring "Run, Turn & Stop" functions.
$1499.00 Click Here to Order
|

Part # 8753RS
Big Ass Bags with mounting brackets and installed Russ Weirmont surface mount plug in Cat Eye lighting featuring "Run, Turn & Stop" functions.
$1499.00 Click Here to Order |
Extended Length Bags for Softails
Extended Bags on Softails? Since there is no standard height exhaust systems, like Harley Touring bikes, there might be the need for custom modifications. If needed we will sell you our brackets Part #8761 in an unpainted finish so you can alter. Our Extended Bags Part # 8806 feature no exhaust cut-outs and are perfect for Softails running radius style exhausts. Below are just a few options for Extended Bags, to see more options please visit our Extended Bags page.

Part # 8781
Extended Bags Stock Width, open from rear with pushbutton lockable latch.
$980.00 Click Here to Order |

Part # 8781W
These are the biggest bags on the market today! Extended Bags 2.5" Wider! Bags open from Rear with pushbutton lockable latch.
$1080.00 Click Here to Order |

New
Part # 8806
These extended bags are closed on both sides. Perfect for running extended bags with radius exhaust systems!
$1040.00 Click Here to Order
|

New
Part # 8805
These extended bags feature left side filled w/ right side cut out for exhaust.
$1015.00 Click Here to Order |
Part # 8880
Sumax Saddle Bag Stand
Are you tired of having to find a piece of carpet or a towel to lay your saddle bags down on, hoping the paint does not get scratched? Well look no further! Sumax Saddle Bag Stand is constructed at Sumax with U.S.A. made mild steel, and Powdercoated with our signature Sumax high gloss black finish. Stainless fasteners and rubber bumpers are included. Stand will accept Harley stock and all aftermarket standard and extended length bags.
$89.00 Click Here to Order
|
| |
Saddle Bag Mounting Brackets for all year Softails
These brackets will allow you to run any Harley (1993+) hard or soft bags. Our Sumax Powdercoated USA Stainless Steel Brackets attach to 2 stock holes on your fender rails and behind your rear passenger peg. Receptacles are similar to stock accepting 1/4 turn DZUS fasteners just like the stock Harley Touring models. Complete kit, nothing else to buy.
Part # 8761 $349.00 + Shipping Click Here to Order
Measurement from mounting hole on fender rail to bottom of support bar: 13.5". You will have to relocate your turn signals on all models except the Deluxe for lid clearance. If your bike is lowered where the rear axle/nut is above the bracket, axle/nut may contact & damage your bag. If you have rear crash bars on your Softail, our brackets will not work. |
DZUS Fastners (set of 4 each includes 1/4 Turn Pins, Washer & Rubber Grommets):

Part # DZUS $36.75 Click Here to Order |

Jeff Frask's Deluxe Softail features a set of HD Hard Bags mounted on a set of Sumax #8761 Brackets.
|
Softail Bagger Overlay Fenders Fill The Gap

Part # 8757
Softail Fender Overlay. Fits 1996+ FXST models with 150 series tire. Overlay attaches to sub fender at seat tab and under seat. Features RWD installed "plug in" to your rear harness with "Run, Turn & Stop" functions.
$525.00 Click Here to Order |

Part # 8756
Plain Softail Fender Overlay. Fits 1996+ FXST models with 150 series rear tire. Overlay attaches to sub fender at seat tab and under seat.
$233.91 Click Here to Order |

Part # 8757FD
Fender overlay with recessed license plate area.
Now you can add your own custom lighting.
$257.64 Click Here to Order |
Part # 8759
Softail Sub Fender for 1996+ Softails with 150 Series tires. Picture shows Part # 8757 on the Sub Fender Part # 8759.
$75.32 Click Here to Order
|

Your stock fender must be cut behind the fender rails to allow for the Overlay to line up with your bags or use our Part # 8759 Sub Fender.
Popular Front Bagger Fenders
|